Sprung Floor Systems
Sprung floors for dance studios, performance spaces and rehearsal rooms, including our FlexiPro and STM sprung hardwood timber systems.
Supply & installSupplied and installed by STM Studio Supplies
Sprung Floor Installation for Dance Studios & Performance Spaces
Supply and installation of sprung floors, vinyl overlays, Weathertex stage floors and dance vinyl hire. Working with studios, theatres and schools from our Chatswood warehouse and across Australia.
Australia-wide installation
International supply on request
Chatswood NSW warehouse
Servicing Sydney and NSW directly
Commercial & residential
Studios, schools, theatres, home studios
Supply only or supply & install
Specifications available on request
At STM SFI
The whole floor, from the slab up
STM SFI is the sprung floor installation arm of STM Studio Supplies. We supply and install the full build-up: subfloor preparation, sprung substructure, timber or Weathertex surface, and the vinyl or finish on top. One team is responsible for the finished floor.
We work on new studio fit-outs, refurbishments of existing spaces, split batten systems for uneven or out-of-level substrates, and stage floors for theatres and halls. Where a space only needs a surface, we supply and lay dance vinyl. Where an event only needs a floor for a season, we hire it.
Product specifications, installation method statements and fire test reports are available on request for specifiers, architects and building certifiers.
What we do
Supply, installation and hire
Every service below can be quoted as supply only or supply and install.
Dance Vinyl & Overlays
Dance vinyl from the Everydance, Broadway, Tarkett Dansflor and Harlequin ranges, supplied and laid permanent, semi-permanent or loose.
Supply & install
Weathertex Stage Floors
Weathertex stage surfaces for theatres, halls and school performance spaces, prepared and finished ready for painting.
Supply & install
Dance Vinyl Hire
Short-term hire of dance vinyl (tarkett) for seasons, tours, eisteddfods and one-off productions, with delivery and laying available.
Hire
Subfloor Prep & Split Batten
Preparation of concrete and timber substrates, plus split batten systems that correct uneven or out-of-level floors before the build-up goes down.
Supply & install
Repairs, Maintenance & Care
Repairs to existing sprung floors and vinyl, ongoing maintenance, and supply of the correct cleaners for dance surfaces.
ServiceWhy STM SFI
How we work
Specified for how the room is used
Ballet, contemporary, tap, pilates and general performance all load a floor differently. We specify the system around what the room is actually used for.
Documentation for specifiers
Product specifications, installation details and fire test reports on request. The paperwork architects, certifiers and school facilities teams ask for.
Stock in Chatswood, installers nationwide
Our warehouse in Chatswood NSW holds stock for Sydney projects, and we install Australia-wide with supply available internationally on request.
Quotes itemised line by line
The questions on our quote form mirror our internal pricing sheet. The number that comes back reflects your room, your access and the finish you chose.
Who we work with
Studios, schools, theatres and stages
From a single home studio to a multi-room commercial fit-out or a theatre stage.
- Dance studios
- Schools
- Theatres
- Gyms
- Home studios
- Halls
- Performance spaces
- Pilates studios
Where we install
Chatswood, Sydney and nationally
Our warehouse is in Chatswood, NSW, so we work regularly across the North Shore, Northern Beaches, Inner West, Eastern Suburbs, Hills District, Sydney CBD and Greater Western Sydney.
Beyond Sydney we install throughout New South Wales and Australia-wide, including Newcastle, Wollongong, Canberra, Melbourne, Brisbane, Adelaide and Perth. Supply-only orders ship nationally, and internationally on request.
- Chatswood
- North Shore
- Northern Beaches
- Inner West
- Sydney CBD
- Western Sydney
- Newcastle
- Wollongong
- Canberra
- Australia-wide
Projects
Recent installations
FAQ
Questions we get asked
What is a sprung floor, and do I need one?
A sprung floor is a build-up that sits between the substrate and the surface you dance on, absorbing impact so the load is taken by the floor rather than the dancer's joints. If a room is used for dance, tap, contemporary or regular jumping work, it is generally specified over a solid substrate. For pilates, barre and low-impact use, a lighter build-up or a vinyl overlay may be enough. Tell us how the room will be used and we will advise.
Can you install over an existing floor?
Often, yes. It depends on the condition and level of what is already there. Uneven or out-of-level substrates can be corrected with a split batten system rather than being demolished. The quote form asks about your existing floor for exactly this reason.
Do you supply without installing?
Yes. Every system can be quoted supply only for your own builder or contractor to install, or supply and install by our team. Installation details and method statements are provided either way.
What is the difference between buying and hiring dance vinyl?
Purchased vinyl is laid permanently or semi-permanently as part of your floor. Hire vinyl (often called tarkett) is supplied for a defined period such as a season, tour, eisteddfod or one-off production, then returned. Choose Dance vinyl hire as your project type and we will quote the hire rate and delivery.
Do you work outside Sydney?
Yes. Our warehouse is in Chatswood NSW and we install Australia-wide, with supply available internationally on request. Travel and freight are quoted per project based on your location, which is why the form asks for your suburb.
How long does an installation take?
It depends on the size of the room, the system specified, the condition of the substrate and site access. We give you an indicative programme with your quote so you can plan around class schedules, term dates or a production calendar.
Can you provide specifications and fire test reports?
Yes. Product specifications, installation details and fire test reports are available on request for architects, specifiers, certifiers and school facilities teams. Mention it in the additional details box and we will include them with your quote.
How do I get an accurate quote?
Complete the quote form below. It asks for room dimensions, existing floor, floor level, finish and laying method, which is what our pricing sheet needs to cost the job properly. Attaching floor plans or photos speeds it up further.
Tell us about your space and we will price it properly.
Request Your Free Quote
Three short steps. The questions match our pricing sheet, so the quote covers your actual room, access and finish.
- Your details
- The space
- Scope & timing
Prefer to talk it through? Call 02 9417 3000 or email sales@monart.com.au